|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Typical Applications The HMC253QS24 / HMC253QS24E is ideal for DC - 2.5 GHz applications: * CATV/DBS * CDMA Features Low Insertion Loss (2 GHz): 1.3dB Single Positive Supply: Vdd = +5V Integrated 3:8 TTL Decoder 24 Lead QSOP Package 8 SWITCHES - SMT * Cellular/PCS Functional Diagram General Description The HMC253QS24 & HMC253QS24E are low-cost non-reflective SP8T switches in 24-lead QSOP packages featuring wideband operation from DC to 2.5 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 3:8 decoder is integrated on the switch requiring only 3 control lines and a positive bias to select each path. The HMC253QS24 & HMC253QS24E SP8T will replace multiple configurations of SP4T and SPDT MMIC switches. Electrical Specifications, TA = +25 C, For TTL Control and Vdd = +5V in a 50 Ohm system Parameter Insertion Loss Frequency DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz "On State" DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz 0.3 - 2.5 GHz 0.5 - 2.5 GHz 0.3 - 2.5 GHz 0.3 - 2.5 GHz 0.3 - 2.5 GHz 30 100 ns ns 32 26 24 14 9 6 7 10 20 40 Min. Typ. 1.1 1.3 1.8 36 30 28 18 12 8 10 13 23 43 Max. 1.5 1.7 2.4 Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm Isolation Return Loss Return Loss (RF1-8) Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) "Off State" 8 - 128 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Insertion Loss 0 -0.5 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 0 1 2 3 FREQUENCY (GHz) +25 C +85 C -40 C Isolation 0 -10 RF6, RF3 ISOLATION (dB) -20 -30 -40 -50 -60 -70 0 1 2 3 FREQUENCY (GHz) 8 SWITCHES - SMT 8 - 129 RF1, RF2, RF4, RF5, RF7, RF8 Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0 1 2 3 FREQUENCY (GHz) RFC RFC 1-6 On RFC 1-6 Off Bias Voltage & Current Vdd Range = +5.0 Vdc 10% Vdd (Vdc) +5.0 Idd (Typ.) (mA) 6.0 Idd (Max.) (mA) 9.0 Truth Table Control Input A Low High Low B Low Low High High Low Low High High C Low Low Low Low High High High High Signal Path State RFCOM to: RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 TTL/CMOS Control Voltages State Low High Bias Condition 0 to +0.8 Vdc @ 5 uA Typ. +2.0 to +5.0 Vdc @ 70 uA Typ. High Low High Low High NOTE: DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4, 5, 6, 7, 8. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Absolute Maximum Ratings Bias Voltage Range (Port Vdd) Control Voltage Range (A, B, C) Storage Temperature Operating Temperature Maximum Input Power Vdd = +5V +7.0 Vdc -0.5V to Vdd +1Vdc -65 to +150 C -40 to +85 C +20 dBm (0.05 - 0.5 GHz) +24 dBm (0.5 - 2.5 GHz) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 SWITCHES - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC253QS24 HMC253QS24E Package Body Material Low Stress Injection Molded Plastic Silica and Silicon Impregnated RoHS-compliant Low Stress Injection Molded Plastic Silica and Silicon Impregnated Leadframe Plating Sn/Pb Solder 100% Matte Tin MSL Rating MSL1 MSL1 [1] Package Marking [3] HMC253 XXXX HMC253 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 8 - 130 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC253QS24 / 253QS24E v04.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2.5 GHz Evaluation Circuit Board 8 SWITCHES - SMT List of Materials for Evaluation PCB 103706 [1] Item J1 - J9 J10 - J14 C1 - C9 C10 U1 PCB [2] Description PCB Mount SMA Connector DC Pin 100 pF Capacitor, 0402 Pkg. 0.01 uF Capacitor, 0603 Pkg. HMC253QS24 / HMC253QS24E SP8T Switch 103704 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF ports should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown above. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 131 |
Price & Availability of HMC253QS2406 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |